FOX forks - Page 1 of 3

North Bristol Mountain Bike Club

Bristol Mountain biking in and around Ashton Court, Leigh Woods, Bristol, XC,Trail All Mountain and Downhill, GPS Maps and Routes, Videos and photos

MTB Articles

# | 0-9 |A |B |C |D |E |F |G |H |I |J |K |L |M |N |O |P |Q |R |S |T |U |V |W |X |Y |Z

MTB Articles » North Bristol Mountain Bike Club » FOX forks

FOX forks (28)RSS Feed

Results 1 - 10 of 28

1. Air Sleeve Maintenance/Stuck Down Shock

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

Air Sleeve Maintenance/Stuck Down Shock CAUTION: FOX air shocks contain high air pressures. Before servicing a FOX air shock, certain precautions and countermeasures need to be taken. Follow these steps in sequence to prevent serious injury,...

2. To Measure Sag On A Rear Shock

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

To Measure Sag On A Rear Shock Measurement #1 Before sitting on the bicycle, measure and record the distance from the center of one shock mounting bolt to the center of the other shock mounting bolt. This is known as the "eye-to-eye" ...

3. 36FLOAT RC2

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36FLOAT RC2 Note: Some photos may not reflect actual model of fork Disassembly To remove the 36 Topcap: Using a hex key wrench, remove the hex key on top of the red rebound knob. Remove the rebound knob by lifting it. ...

4. 36FLOAT R

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36FLOAT R Note: Some photos may not depict the actual model of fork. Disassembly To remove the 36 Topcap: Using a hex key wrench, remove the hex key on top of the red rebound knob. Remove the rebound knob by lifting it. ...

5. 36 mm TALAS III RC2

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36 mm TALAS III RC2 The full "TALAS System" fork service overhaul procedures on this page require specialized tools and a higher level of technical expertise. The full service procedures are intended for the qualified service technicians having...

6. 36 mm TALAS III R

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36 mm TALAS III R The full "TALAS System" fork service overhaul procedures on this page require specialized tools and a higher level of technical expertise. The full service procedures are intended for the qualified service technicians having this...

7. 36 mm TALAS II RC2

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36 mm TALAS II RC2 The full "TALAS System" fork service overhaul procedures on this page require specialized tools and a higher level of technical expertise. The full service procedures are intended for the qualified service technicians having...

8. 36 mm TALAS II R

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

36 mm TALAS II R The full "TALAS System" fork service overhaul procedures on this page require specialized tools and a higher level of technical expertise. The full service procedures are intended for the qualified service technicians having this...

9. 2010 FIT Remote Service Procedures

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

2010 FIT Remote Service Procedures Tip: In the following table, clicking the part numbers will open these example diagrams in .pdf file format. Clicking the linked descriptions will open the same diagrams as linked graphics, letting you see how...

10. Re-lubricating the Remote RL Internal Actuating Mechanism

Currently 0.00/5
1
2
3
4
5

0.0/5 (0 vote)

Re-lubricating the Remote RL Internal Actuating Mechanism As preventative maintenance, the 2009 Remote Lockout fork internal cams should be periodically re-lubricated. The following maintenance procedure should be followed only if the Remote...

«
Start
Prev
1
2
3
Next
End
»

Page 1 of 3